Codes
Add/Change User Codes
This function is used if you want to add a code for a new user or
if you want to change the user permission levels or the code of
an existing user. Only master users can add or change user
codes.
Notice!
Macros can only be used with a text keypad.
How to Add/Change User Codes
1.
Enter your code + [5] [4] and press [#].
The system beeps twice and the STAY and AWAY indicators
start flashing.
2. Enter a user number (1-64) and press [#].
The current user permission level for this user is shown.
(Default for user number 2-64 is 6-Not used)
3. Select the desired user permission level. You can choose
the following user permission levels for a code:
0-Master1 code
1-Master2 code
2-Super code
3-Basic code
4-Arming code
5-Duress code
6-Not used
Please refer to Quick Keypad Operations Instructions, page
10 for a description of the user permission levels.
4. Press [#].
The available areas are shown. Already selected areas are
checked.
9
9.1
32 en | Codes AMAX panel
2015.05 | 04 | F.01U.295.569 Bosch Sicherheitsysteme GmbH
To Next Page
Loading...
Need help?
General
