3. The system beeps twice.
4. Enter your code + [3] [1] + [#] for bypassing zones (see
also Bypassing/Unbypassing Zones, page 26).
The STAY indicator flashes fast. The available zones are
shown. Unavailable zones are marked with an x.
5. Enter [0] [3] for bypassing zone 3.
Zone 3 is checked.
6. Press [#] to confirm.
7. Press [#] to exit the bypass menu.
8. Press [#] for three seconds to end the recording of the
macro and to save it.
P The system beeps twice. The macro 1 for bypassing zone 3
is recorded. Zone 3 is bypassed.
30 en | Macros AMAX panel
2015.05 | 04 | F.01U.295.569 Bosch Sicherheitsysteme GmbH
To Next Page
Loading...
