4. Refer to the table Types of fault or tamper conditions for a
description of the fault or temper. The consecutively lit
number indicators correspond to fault or tamper types.
Example: 2 – 1, which indicates a panel AC failure.
5. If necessary press [0] to return to step 2.
6. Press [#] to exit.
P The STAY and AWAY indicators are extinguished and the
FAULT indicator is lit.
AMAX panel Faults and Tamper Conditions | en 39
Bosch Sicherheitsysteme GmbH 2015.05 | 04 | F.01U.295.569
To Next Page
Loading...
