16 en | AVENAR panel series AVENAR panel
2022-07 | 5.0 | F.01U.378.910
System manual
Bosch Sicherheitssysteme GmbH
Pos. Designation Function
A Interfaces CAN1, CAN2, IN1/2, Rail
B Touchscreen Operating the networked system through virtual buttons and variable display
windows
C 6 fixed buttons Standard entries
D Memory card slot Memory card reader for maintenance services
E Power button Shutdown and restart of the device
F Product label Important product data
G DIP switch label DIP switch label with areas to write down the PNA (Physical Node Address) and
the IP address
H Power supply DC1 / DC2
I 6-pin DIP switch DIP switch settings for CAN bus networking & panel redundancy
J 18 LEDs Indicating the operating status
It comes with easy-to-install housing for tilted installation and for surface or flush wall
mounting. Power can be supplied by the panel or an external power supply unit such as the
FPP-5000.
To Next Page
Loading...
