AVENAR panel Maintenance and service | en 59
Bosch Sicherheitssysteme GmbH
System manual
2022-07 | 5.0 | F.01U.378.910
– To simplify the panel controller replacement, it is recommend not the change the
Ethernet pattern. For instance keep the Ethernet switch in the panel and keep the OPC or
FSI interface connected to the switch. Removing the switch or moving the OPC or FSI
interface to Ethernet port 3 will result in a changed autonomy.
– When the configuration is not identical, certainly when Ethernet port 3 or 4 are used, it is
mandatory to recalculate the battery capacity with the Safety Systems Designer.
Remote keypad
– When replacing a remote keypad, it is mandatory to replace all the plastic parts as well.
– For ease of installation, the dimensions of the flush mount bracket are identical to the
previous version.
To Next Page
Loading...
