Bosch D7412GV4 - Special User Ids (Uuuu, IIII); Keypad Alarm Virtual Point Numbers (Ppp, Pppp)

SDI2 11, 21, 31, 41 411, 421, 431, 441 Paths 1 through 4 on SDI2 Network
Module 1
SDI2 12, 22, 32, 42 412, 422, 432, 442 Paths 1 through 4 on SDI2 Network
Module 2
any 99 499 Used for DNS lookup error of RPS
hostname
Bus Keypad display # Reporting number Description
OnBrd 10, 20, 30, 40 410, 420, 430, 440 Paths 1 through 4 via On-board Ethernet
OnBrd 18, 28, 38, 48 418, 428, 438, 448 Paths 1 through 4 via On-board Cellular
Module
OnBrd 1 – 16 451 – 466 Personal notification path (destination)
number 1 through 16
Special User IDs (uuuu, iiii)
To better identify the originator of some control panel events with no unique, Standard User
identified, special user IDs designate each special case. All user ID are defined in the table
below.
User ID Type Keypad Display Contact ID
reporting
Modem Format User Text
Service User 0 F00 0 “SERVICE USER”
Standard User 1…254 001…254 1…254 {configured text}
255…999 255…999 255…999 {configured text}
Time Sync 5001 F01 5001 “AUTO TIME SYNC”
RPS User 5002 F02 5002/none “BY RPS”
Automation User 5003 F03 5003/none “BY AUTOMATION”
Keyswitch 5004 F04 5004 “BY KEYSWITCH”
No User Specified User not displayed 000 0xFFFF (displays
blank)
{no text}
Keypad Alarm Virtual Point Numbers (ppp, pppp)
Special point numbers have been designated to identify the originator of manually created
keypad alarm events. All special point numbers are defined in the table below.
Originating Keypad (SDI2 only) Reported Number Originating Keypad (SDI2
only)
Reported Number
Keypad 1 330 Keypad 9 410
Keypad 2 340 Keypad 10 420
Keypad 3 350 Keypad 11 430
Keypad 4 360 Keypad 12 440
11.5
11.6
Control Panel Reporting and Device Number Information | en 37
Bosch Security Systems, Inc. Quick Reference Guide 2014.05 | 05 | F.01U.265.463