Callout ￚ Description
1 ￚ Removable terminal strip
Remove the Existing Control Panel
1. Remove the lock down tab screw.
2. Lift up on the control panel to free it from the enclosure mounting hooks, and remove the
control panel from the enclosure.
Figure 3.2: Removing the Existing Control Panel
Callout ￚ Description
1 ￚ Lock down tab
Install the D9412GV4/D7412GV4 v2.00 Control Panel in the Enclosure
1. Place the D9412GV4/D7412GV4 v2.00 Control Panel in the enclosure using the mounting
skirt hook holes on the back of the control panel and the mounting skirt hooks on the
enclosure.
2. Replace the lock down tab screw.
Figure 3.3: Installing the D9412GV4/D7412GV4 v2.00 Control Panel
3.2.2
3.2.3
Control Panel Upgrade D9412GV4/D7412GV4 Hardware and Programming | en 9
Bosch Security Systems, Inc. Quick Reference Guide 2014.05 | 05 | F.01U.265.463
To Next Page
Loading...
