Bosch D7412GV4 - Page 132

All On
Turning an area All On turns on all points in the area and
provides entry and exit delay. For example, you can turn
on the area and leave through a door (within exit delay
time) without creating an alarm event. When you turn
the area All On, the display shows how many seconds of
exit delay time remain to exit the protected area. Leave
before the exit delay time expires.
Leaving after
exit delay expires causes entry delay to
start. It may also cause an alarm on an interior device.
Enter your passcode to turn off the system.
Turning areas All On:
1. Open the Main menu.
2. Press [1] or [ENTER] to open the On/Off menu.
3. Press [1] or [ENTER] to open the All On menu.
4. Press [1] or [ENTER] to select All On Delay.
5. Enter your passcode and press [ENTER]. The keypad
shows Exit Now! and sounds during the exit delay.
6. Exit the area or enter your passcode to stop the
system from turning on. If you turn your system All
On and don't exit, the system automatically switches
to Part On.
24.1.1
132 en | B92x/B91x On/Off menu Control Panels
2014.04 | 05 | F.01U.287.176 Bosch Security Systems, Inc.