Service Bypass
To facilitate system maintenance for service personnel,
your security system comes with a special point bypass
option to remove any point from service. Bypassed
points are not protected. Use this menu to view
bypassed points.
Viewing points in Service Bypass:
1.
Open the Main menu.
2. Use [NEXT] to go to the Actions menu option, and
press [ENTER], or simply press [3].
3. Use [NEXT] to go to the Service Bypass menu
option, and press [ENTER], or simply press [6].
4. Enter your passcode and press [ENTER]. The keypad
shows any points in service bypass.
26.7
Control Panels B92x/B91x Actions menu | en 161
Bosch Security Systems, Inc. 2014.04 | 05 | F.01U.287.176
To Next Page
Loading...
