Date/Time
Your security system must have the correct time and
date for scheduled events to occur at the correct times.
Use the Date/Time function to set both the time and
date. The security system uses a 12-hour AM/PM format.
If your security system is configured for automatic date/
time updates, the update might overwrite your changes.
Setting the date and time:
1.
Open the Main menu.
2. Use [NEXT] to go to the Settings menu option, and
press [ENTER], or simply press [5].
3. Use [NEXT] to go to the Date/Time menu option,
and press [ENTER], or simply press [2].
4. Enter your passcode and press [ENTER].
5. Press [1] or [ENTER] to set the control panel’s date.
6. Enter the new date in MM/DD/YY format. If you
make a mistake, the [ESC] key acts as a backspace
key. Press [ESC] to delete the characters and then
enter the new numbers.
7. Press [ENTER]. The keypad shows Change complete
and then returns to the previous menu.
8. Use [NEXT] to go to the option to change the time,
and press [ENTER], or simply press [2].
28.2
Control Panels B92x/B91x Settings menu | en 183
Bosch Security Systems, Inc. 2014.04 | 05 | F.01U.287.176
To Next Page
Loading...
