How the system reports
events
Your security system makes repeated attempts to send
reports to your security company. In the event your
security system fails to communicate, the keypad
sounds the trouble tone and the keypad shows a
communication failed message. Notify your security
company of the communications failure.
If your telephone, internet, or cellular service is
interrupted, your security system cannot send reports
to the security company unless an alternate means of
transmitting the reports exists.
For telephone communication, your security company
can program your security system to automatically
disconnect the telephones when sending reports to the
security company. Once the report finishes, the security
system returns the telephones to normal operation
(check with your security company).
Consult with your installer to determine if your security
system is configured with a communicator delay. A
communicator delay aborts reports to your security
6
Control Panels How the system reports events | en 19
Bosch Security Systems, Inc. 2014.04 | 05 | F.01U.287.176
To Next Page
Loading...
