Outputs
Your security company programs outputs for automatic
control and/or keypad control of devices such as
premises lighting or entry gates. An
output is a device
that is controlled by the security system. Contact your
security company for further information regarding the
use of outputs in your security system.
Use this function to select outputs to turn on or off.
Outputs on your security system can control other
systems, lighting for example.
Turning outputs on and off:
1. Open the Main menu.
2. Use [NEXT] to go to the Actions menu option, and
press [ENTER], or simply press [3].
3. Use [NEXT] to go to the Outputs menu option, and
press [ENTER], or simply press [2].
4. Enter your passcode and press [ENTER].
5. Use [NEXT] to select the desired output value, or
use the number keys to enter the value.
6. Press [ENTER]. The current state of the output
shows.
7. Use [ENTER] to toggle between Off and On.
8. Press [ESC] to exit the menu.
26.2
Control Panels B92x/B91x Actions menu | en 149
Bosch Security Systems, Inc. 2014.04 | 05 | F.01U.287.176
To Next Page
Loading...
