Service bypass
To facilitate system maintenance for service personnel,
your security system comes with a special point bypass
option to remove any point from service. Bypassed
points are not protected. Use this menu to view
bypassed points.
Viewing points in Service Bypass:
1.
Open the Main menu.
2. Press [Actions] to open the menu.
3. Press [Srv Bypass] to open the menu. The keypad
shows any points in service bypass.
16.7
Control Panels B94x/B93x Actions menu | en 79
Bosch Security Systems, Inc. 2014.04 | 05 | F.01U.287.176