Add User
Use the Add User function to add a passcode to your
security system. Before you add the user, you need to
know which user numbers are available, the authority
level you want to assign to the new passcode, and the
areas in which it will be valid.
The user numbers identify users in reports transmitted
from your security system. The authority level
determines what system functions the passcode can
access. The area number identifies which parts of your
security system the passcode can access. Contact your
security company if you don’t know what user numbers,
authority levels, or areas are available.
27.2
170 en | B92x/B91x Users menu Control Panels
2014.04 | 05 | F.01U.287.176 Bosch Security Systems, Inc.
To Next Page
Loading...
