Before you begin:
–
Do not try to add passcodes without knowing the
available user numbers. These numbers are not to
be confused with passcodes that identify users at
your security company.
– Choose a new passcode three to six digits long. If
you choose a passcode with the same digit in
consecutive order (for example “33” in 334697),
take care when entering it.
– To avoid conflicting with other passcodes and
duress codes, your security system does not let you
add passcodes that are within plus or minus 2 of an
existing passcode. For example, if 1234 is an
existing code, your system does not let you change
your code to 1232, 1233, 1235, or 1236.
– Choose an authority level for each area. Leaving the
authority level for an area blank by pressing [ENTER]
without making an entry, denies the passcode
access to that area.
Control Panels B92x/B91x Users menu | en 171
Bosch Security Systems, Inc. 2014.04 | 05 | F.01U.287.176
To Next Page
Loading...
