Trouble events
Fire trouble events
When a fire trouble occurs, the keypad emits the
trouble tone (three tones followed by a pause
repeated). The system shows the number of fire points
with troubles and the name for each point in trouble.
Silence fire troubles
Press
[ENTER] to silence the trouble tone.
After you silence the trouble, the text of the fire point in
trouble continues to show on the display. Use
/
[NEXT] to scroll through the trouble text. Events scroll
from oldest to newest. You cannot clear fire troubles
from the display until the trouble condition is cleared
(the point is normal).
Gas trouble events
When a gas trouble occurs, the keypad emits the
trouble tone (three tones followed by a pause
repeated). The system shows the number of gas points
with troubles and the name for each point in trouble.
Silence gas troubles
Press
[ENTER] to silence the trouble tone.
8
8.1
8.1.1
8.2
8.2.1
26 en | Trouble events Control Panels
2014.04 | 05 | F.01U.287.176 Bosch Security Systems, Inc.
To Next Page
Loading...
