Part On menu
Use the Part On menu to turn areas Part On. Turning an
area Part On means to turn on only some of the points,
and thus part of the system. For example, your security
company might configure your system so that when you
use the Part On function, only the exterior doors and
windows turn on, whereas interior motion sensors do
not turn on.
Part On
Turning an area Part On turns on some points, or part of
the system, in the area and provides entry and exit
delay. For example, you can turn on the area and leave
through a door (within exit delay time) without creating
an alarm event.
Turning the perimeter on with an exit delay:
1.
Open the Main menu.
2. Press [On/Off] to open the menu.
3. Press [Part On] to open the menu.
4. Press [Part On Delay] to open the menu.
5. Enter your passcode and press [ENTER]. The keypad
shows Part On Delay.
14.2
14.2.1
54 en | B94x/B93x On/Off menu Control Panels
2014.04 | 05 | F.01U.287.176 Bosch Security Systems, Inc.
To Next Page
Loading...
