Bosch D7412GV4 - Page 143

Unbypass
Unbypassing a point returns a bypassed point to the
security system so that it can once again respond to
trouble and alarm conditions.
Unbypassing a point:
1.
Open the Main menu.
2. Press [1] or [ENTER] to open the On/Off menu.
3. Use [NEXT] to go to the Bypass menu, and press
[ENTER], or simply press [5].
4. Use [NEXT] to go to the Unbypass menu, and press
[ENTER], or simply press [2].
5. Enter your passcode and press [ENTER].
6. Select a point to bypass.
7. Press [ESC] to exit the menu.
24.5.2
Control Panels B92x/B91x On/Off menu | en 143
Bosch Security Systems, Inc. 2014.04 | 05 | F.01U.287.176