Network Originate
Use this function to originate an
RPS session using an
internet connection.
Connecting to RPS using an internet connection:
1. Open the Main menu.
2. Use [NEXT] to go to the Actions menu option, and
press [ENTER], or simply press [3].
3. Use [NEXT] to go to the RPS menu option, and press
[ENTER], or simply press [4].
4. Use [NEXT] to go to the Network Originate menu
option, and press [ENTER], or simply press [2].
5. Enter your passcode and press [ENTER].
6. To use the programmed port number, press [1] or
press [ENTER]. The connection progress begins.
7. If you wish to change the port number before
connecting, press [NEXT] and then [ENTER], or
simply press [2]. The [ESC] key acts as a backspace
key. Press [ESC] to delete the characters, and then
enter the new characters. Press [ENTER]. The
connection process begins.
26.4.2
Control Panels B92x/B91x Actions menu | en 157
Bosch Security Systems, Inc. 2014.04 | 05 | F.01U.287.176
To Next Page
Loading...
