Bosch D7412GV4 - Page 177

1. Use [NEXT] to go to the Configure Name option, and
press
[ENTER], or simply press [2].
2. Press [ENTER] to configure the user’s name.
3. The [ESC] key acts as a backspace key. Press [ESC]
to delete the characters. Press a number key
repeatedly to scroll through the number and letters
shown on the key. To enter a space, press [0][0]. To
enter a space, press [0][0]. To capitalize a letter,
press [CMD] before you enter the letter. For caps
lock, press [CMD][CMD]. To remove caps lock,
press [CMD][CMD][CMD].
4. Press [ENTER] to save the new name. The keypad
returns to the previous menu.
Configuring the user’s level:
1. Use [NEXT] to go to the Configure Level option, and
press [ENTER], or simply press [3].
2. Press [ENTER] to change the default authority level
for area 1.
3. Enter the authority level number (1 – 14) you wish
to apply to the user and press [ENTER]. The keypad
shows Level configured and returns to the previous
menu.
4. If your security system has more than one area, use
[NEXT] and the previous two steps to set the levels
for the additional areas.
Control Panels B92x/B91x Users menu | en 177
Bosch Security Systems, Inc. 2014.04 | 05 | F.01U.287.176