Bosch D7412GV4 - Page 186

Enabling a disabled SKED:
1.
With the SKED you wish to enable showing, press
[ENTER].
2. Press [ENTER] to continue.
3. Enter the new time in HH:MM format. If you make a
mistake the [ESC] key acts as a backspace key.
Press [ESC] to delete the characters and then enter
the new numbers.
4. Press [ENTER] to save the time and choose AM or
PM.
5. Press [ENTER] to select AM, or press [NEXT] and
then [ENTER] to select PM. The keypad shows
Schedule update complete and then returns to the
previous menu.
6. Press [ESC] to exit the menu.
Disabling an enabled SKED:
1. With the SKED you wish to enable showing, press
[ENTER].
2. Press [ENTER].to continue disable it. The keypad
display indicates that the SKED is disabled.
3. Press [ESC] to exit the menu.
186 en | B92x/B91x Settings menu Control Panels
2014.04 | 05 | F.01U.287.176 Bosch Security Systems, Inc.