Bosch D7412GV4 - Page 75

Network Originate
Use this function to originate an
RPS session using an
internet connection.
Connecting to RPS using an internet connection:
1. Open the Main menu.
2. Press [Actions] to open the menu.
3. Press [RPS] to open the menu.
4. Press [Network Originate] to open the menu.
5. To use the programmed port number, press
[Configured Port]. The connection progress begins.
6. If you wish to change the port number before
connecting, press [Change Port]. Press [ENTER].
The connection progress begins.
16.4.2
Control Panels B94x/B93x Actions menu | en 75
Bosch Security Systems, Inc. 2014.04 | 05 | F.01U.287.176