Lock Door
Use the Lock Door menu to lock an unlocked door. Also
use this menu to lock doors that were automatically
opened during a fire alarm. Once a door is locked, a
user must present a card to enter, or send an Unlock or
a Cycle command from the keypad to allow the door to
open.
Locking a door:
1.
Open the Main menu.
2. Press [Actions] to open the menu.
3. Press [Access] to open the menu.
4. Press [Lock Door] to open the menu.
5. Enter your passcode and press [ENTER].
6. Enter the number of the door you wish to lock, then
press [ENTER]. The door locks and the display
changes to show the door’s number (1 – 8).
7. Escape from the menu.
16.8.3
84 en | B94x/B93x Actions menu Control Panels
2014.04 | 05 | F.01U.287.176 Bosch Security Systems, Inc.
To Next Page
Loading...
