Configuring a RADION keyfob or an Inovonics
Transmitter for the user:
1.
Press [Keyfob] to assign a RADION keyfob or an
Inovonics Transmitter to the user.
2. To remove a previously added keyfob or transmitter,
press [Remove].
3. To replace a previously added keyfob or transmitter,
press [Replace] and then [Replace], and follow the
next step.
4. On a RADION keyfob, press any button. On an
Inovonics Transmitter, open the transmitter and
press the RESET button, per the manufacturer’s
instructions. The keypad shows Keyfob enrolled.
5. To add a RADION keyfob or an Inovonics
Transmitter, press [Add] to continue, and follow the
previous step.
6. To manually enter the RFID, if desired, press [Enter
RFID] to add the RFID. Otherwise, the keypad
automatically learns the RFID into the security
system when you add a RADION keyfob or an
Inovonics Transmitter.
7. Press [ENTER] to continue.
8. Enter the RFID.
9. Press [Save] to save the RFID and return to the
previous menu.
Adding or replacing a card for the user:
96 en | B94x/B93x Users menu Control Panels
2014.04 | 05 | F.01U.287.176 Bosch Security Systems, Inc.
To Next Page
Loading...
