DIVAR 2000 / DIVAR 3000 / DIVAR
32 en | Settings
5000
Default
Notice!
User settings and recordings will be lost
The system menu display, language, time display mode, video format, IP address and
recordings will all lose their user defined setup after the factory defaults are restored.
To restore the unit to its factory default:
1. Select the check box for the settings you wish to return to the factory default.
2. Click <Reset> to reset the chosen defaults (you may need to enter a Password to confirm
the restore).
2016.09 | v1.0 | AM18-Q0717 Operation Manual Bosch Security Systems
To Next Page
Loading...
