Bosch DIVAR 2000 - Monitor A; Monitor B (only for DIVAR 5000 models)

DIVAR 2000 / DIVAR 3000 / DIVAR
Operation | en 53
5000
7.2.4
7.2.5
2. Check that a sequence of camera pictures appears,
3. To stop sequencing, right-click the mouse to access the Quick menu, and choose
Sequence off
Monitor A
Monitor A shows live pictures of connected cameras in full-screen or multiscreen, plus status
messages and alarm events (e.g. motion and video loss warnings). When multiple events
occur, camera pictures can also be sequenced on monitor A to follow the events.
The search/play function and all user menus are also activated on this monitor.
Monitor B (only for DIVAR 5000 models)
Monitor B displays live pictures in full-screen (multiscreen is possible if a multiple-view
sequence is enabled on Mon B). If an alarm/detect event is signaled, the camera picture with
the event can be displayed on monitor B. When multiple events occur, camera pictures can
also be sequenced on monitor B to follow the events.
Bosch Security Systems Operation Manual 2016.09 | v1.0 | AM18-Q0717
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com