EasyManua.ls Logo

Bosch i:SY - Written Labels; Units; 6 Notes on the E-Bike; Differences between a Bicycle and an E-Bike

Bosch i:SY
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
Notes on the e-bike
Temperature limits: Minimum and maximum temperature at which
the corresponding component may be used� At the same time,
both the temperature limits for the component as well as for the
ambient temperature may be specified�
Pedalling frequency: Number of revolutions of the pedal drive in
one minute expressed in the unit “1/min”.
5.4 Written labels
Image captions and references in the text are rendered in italics
5.5 Units
Unit Meaning Unit for
1/min per minute Revolutions
A Amperes Electric current (=W/V)
Ah Ampere hour Electric charge (=Wh/V)
g Gram Weight (=kg/1000)
Hz Hertz Frequency (Hz=oscillation/s)
kg Kilogramme Weight (=g×1000)
Nm Newton meter Torque
V Volt Electric voltage (=W/A)
W Watt Electric power (A/V)
Wh Watt hour Electric capacitance (=V×Ah)
6 Notes on the e-bike
E-bikes are available with a speed of up to 25 km/h or with a speed
of over 25 km/h�
E-bikes with a speed of up to 25 km/h do not require a licence
within the EU.
Stricter regulations apply to e-bikes which travel at speeds of over
25 km/h which will be indicated separately
The term e-bike is used in this original operating manual for both
categories�
6.1  Differences between a bicycle and
an e-bike
The additional components of the electric drive constitute the major
differences between a conventional bike and an e-bike�
The e-bike is significantly heavier and its weight distribution
is different from conventional bicycles� This results in different
handling�
The drive has a significant effect on braking characteristics�
E-bikes require greater braking forces. This may result in
greater wear than with conventional bicycles�
The electrical assistance will increase your average speed�

Table of Contents

Related product manuals