49
Operation
12.2.25.3 Setting the operating mode
1� Move the joystick to the right�
The available settings will be shown on top of the active operating
mode�
2� To switch the setting, move the joystick up or down�
3� Push the joystick to select the setting�
Note: If you take the board computer out of the holder, all val-
ues for the functions will remain saved and can be subsequently
displayed�
Fig.: Operating modes
12.2.26 Status indicators
The status indicators will be displayed depending on the operating
mode and the selected settings�
• Read the individual meanings on the status indicators in “Table 2”�
• Observe the different positions of the status indicators
(see Fig�: “Status indicators”)�
Fig.: Status indicators
To Next Page
Loading...
