1
2
Assistance level indicator for “ActiveLine” or “PerformanceLine”
(left) and “Nyon” (right)�
1� Push the + (plus) or – (minus) button on the control unit to
adjust the assistance level�
2� Select one of the following levels:
OFF: The drive is deactivated. You can propel the e-bike by ped-
alling, just like a bicycle�
ECO: Effective assistance with maximum efficiency for maximum
range�
TOUR: Uniform assistance, for touring with a long cruising range.
SPORT / eMTB:
SPORT: Powerful assistance for sportive riding on mountainous
routes as well as for urban traffic�
eMTB: optimal support, sporty start, improved dynamics, maxi-
mum performance�
TURBO: Maximum assistance, supporting the highest cadence
for sportive riding�
The level of assistance is shown on the control computer� As a
bar diagram for the “ActiveLine” or “PerformanceLine” and as
a checkmark for the “Nyon” (see Fig�: “Decreasing the level of
assistance”)�
Note: If the control computer is taken out of the holder, the last
riding mode shown is stored in the memory�
12.2.17 Lights
When activating the lighting, “Light on” will appear for approx.
1 second in the text display field and “Light off” when deactivating
the lighting� The lighting symbol
will be shown when the light
is activated�
• To switch the lighting on or off, push the
button�
Activating and deactivating the lighting does not affect the back-
light of the display� The backlight of the display is active as soon as
the e-bike or the control computer has been activated�
12.2.18 Charging external devices via USB
You can operate or charge external devices by connecting them to
the USB port on the control unit.
Note:The control computer and a sufficiently charged recharge-
able battery must be inserted in the e-bike in order to use and
charge external devices.
To Next Page
Loading...
