40
Operation
– Time format: The time is displayed in 12 or 24 hour format�
– Time: Changing the time�
Note: Pushing and holding the – (minus) or + (plus) buttons ac-
celerates how fast the time changes�
– English: You can change the language of the text in the text
display field. You can choose from German, English, French,
Spanish, Italian and Dutch.
– Total cycling time: Displays the total cycling time with the
e-bike (cannot be changed)�
– Wheel circumference: If other tyres are used, this value can
be changed by ±5 %�
– Gear recommendation on/off: Switch gear recommendation
on/off�
Displaying and changing the basic settings is possible when the
control computer is inserted and removed�
3� To select the basic settings, push the RESET button and the
button at the same time until “Settings” appears in the text
display field�
4� Push the
button repeatedly until the desired basic setting
appears�
5� To reduce the value or scroll down, push the
button� To
increase the value or scroll up, push the
button�
• When the control computer is inserted, use the – (minus) or
+ (plus) buttons on the control unit�
6� To leave the basic setting and save it, push the RESET but-
ton for 3 seconds�
12.2.12 Optional basic settings
Note: This chapter only applies to the “ActiveLine” or “Perfor-
manceLine” with the option “Intuvia eShift” and electronic gear
shift�
– Gear recommendation on/off: You can activate or deactivate
the gear recommendation display�
– Gear calibration (only for models with the “NuVinci H|Sync”
gear shift): Calibration of the continuous variable gear�
• Start the calibration by pushing the
button on the control
computer�
• Then follow the instructions on the indicator�
– Displ. vx.x.x.x: Software version of the indicator�
– DU vx.x.x.x*: Software version of the drive unit�
– Bat vx.x.x.x*: Software version of the rechargeable battery�
– Gear vx.x.x.x*: Software version of the gear shift�
*This value is only displayed if the board computer is located in
the holder�
To Next Page
Loading...
