43
Operation
NOTICE
Irreparable damages may occur if the USB port is used
incorrectly�
Risk of damage!
• Read the user manual of the external device and check
whether the device is suitable for connection�
• Only use a compliant USB cable.
• The USB port must always be sealed with the protective
cap�
• Do not charge or operate external devices while driving
or in the rain�
1� Open the cover�
2� Use a USB 2.0 cable (Micro A or Micro B type) that complies
with applicable standards to connect the USB port of the ex-
ternal device with the USB jack on the control computer.
12.2.19 System query with USB
Note: You can use the USB port to connect a diagnosis system
from the “Purion” model and check the version status of the sub-
system. The USB port has no other function.
1� When the e-bike system is switched off, push both the - (Mi-
nus) and + (Plus) buttons at the same time�
2� Push the
button on the control computer�
Fig.: USB port to the Purion control computer
1 Protective cap 2 USB socket
1
2
To Next Page
Loading...
