62
Error messages
Display Error source Measure
655 Rechargeable battery collective mes
-
sage
- 1) Switch the e-bike off�
- 2) Remove the rechargeable battery and check it with the
button�
- 3) If the rechargeable battery is charged, insert it and start the e-bike.
656 Software version Have your specialist dealer perform an update�
7xx Gears Follow the operating instructions for the gear manufacturer�
no indicator Control computer Restart the e-bike�
14.1 Rechargeable battery
Display Error source Measure
The 2nd and 4th
LED are flashing
Electric Cell Protection (ECP) Contact your specialist dealer�
The 1st, 3rd and 5th
LED are flashing
Temperature too high or low Let the rechargeable battery reach the operating temperature�
No indicator during
the charging process
Connection or charger
- 1) Check the connections for dirt�
- 2) Check the mains voltage�
- 3) Have the charger checked�
14.2 Charger
Display Error source Measure
The LED will flash
in red�
Charging error Check the connections for dirt�
To Next Page
Loading...
