60
Error messages
14 Error messages
Display Error source Measure
410 /418 Button(s) blocked Check the buttons and clean them if necessary�
414 Control computer connection Check the cable connections and contacts (visual check)�
419 Configuration Restart the e-bike�
422 Drive unit connection Check the cable connections and contacts (visual check)�
423 Rechargeable battery connection Check the cable connections and contacts (visual check)�
424 Communication Check the cable connections and contacts (visual check)�
426 Internal timeout Restart the e-bike (see chapter “Operation / E-bike”)�
430 The control computer's rechargeable
battery is empty
Read the chapter “Operation / Control computer”�
431 Software version Restart the e-bike�
440 Drive unit Restart the e-bike�
450 Software Restart the e-bike�
460 USB port Remove the cable from the control computer�
490 Control computer Consult a specialist dealer�
500 Drive unit Restart the e-bike�
502 Lights Check the components of the lighting and their connection (visual check)�
503 Speed sensor Restart the e-bike�
510 Internal sensor Restart the e-bike�
511 Drive unit Restart the e-bike�
530 Rechargeable battery
- 1) Switch the e-bike off�
- 2) Remove the rechargeable battery and check it with the
button�
- 3) If the rechargeable battery is charged, insert it and start the e-bike.
531 Configuration Restart the e-bike�
To Next Page
Loading...
