48
Operation
12.2.23 Operating notes
• Operate all functions and views with the joystick and the
button:
• on the control unit when using public roads
(see Fig�: “Buttons on the control unit”)�
• either on the control computer or the control unit (see
Fig�: “Operating modes”) and the following chapter
“Operating computer”�
• For other operations and indicators of the control unit, read the
chapter “Operation / E-bike”�
Fig.: Buttons on the control unit
1 Button 2 Button
1
2
12.2.24 Buttons on the control computer
The control computer is equipped with the following buttons.
–
button: Switching the control computer or the e-bike on and
off (see chapter “Operation / E-bike”)�
–
button: To configure and access your current settings and
your user profile in the operating mode “Settings / My Nyon”
(see chapter “Operating modes in the main menu”)�
–
button: Switch the lighting on and off (see chapter “Opera-
tion / E-bike / Lighting”)�
– Joystick
: Navigating through the operating modes (see
chapter “Joystick”)�
12.2.25 Joystick
12.2.25.1 Displaying the main menu
1� Move the joystick to the left to display the main menu�
The main menu will be shown above the active operating mode
(see Fig�: “Operating modes”)�
2� Push the joystick to switch to the main menu�
12.2.25.2 Selecting the operating mode
1� To switch the operating mode, move the joystick up or
down�
2� Push the joystick to select the operating mode�
To Next Page
Loading...
