2 en | Table of Contents Control Panel
2014.06 | 02 | F01U298027 Quick Reference Guide Bosch Security Systems, Inc.
Table of contents
1
Introduction 5
2
Programming 6
2.1 TEXT LCD Codepad Menu Programming 6
2.2 ICON LCD Codepad Programming 9
2.3 Programming Option Bits 10
2.4 Installer's programming commands 10
3
Operating Commands 11
3.1 Add/Delete RF Device (Wireless Zones) 13
3.2 Add/Delete RF Repeater 13
3.3 Add/Delete RF Keyfob 13
3.4 Set First Test Report 14
3.5 Change Domestic Telephone Numbers 14
3.6 Change the Telco Arm/Disarm Sequence 14
3.7 Set STAY Mode 2 Zones 15
3.8 Report Monitor Mode (Toggle On/Off) 15
3.9 Walk Test Mode 15
3.10 Event Memory Recall 15
4
Programming Parameters 19
4.1 Phone Programming 19
4.1.1 Receiver 1 19
4.1.2 Receiver 2 19
4.1.3 Dialing Format 20
4.1.4 External Network Module 1 20
4.1.5 External Network Module 2 20
4.1.6 Password for A-Link Plus/RSC Connection 20
4.1.7 Telco Arming Sequence (Call Forward On) 20
4.1.8 Telco Disarm Sequence (Call Forward Off) 20
4.1.9 Call Back Telephone Number 20
4.1.10 Ring Count 21
4.1.11 Telephone Line Fail Options 21
4.1.12 Dialer Options 1 21
4.1.13 Dialer Options 2 21
4.1.14 Dialer Options 3 22
4.1.15 A-Link Plus Options 22
4.2 Installer Code 22
4.3 User Code Programming 22
4.4 Day Alarm Zones 24
4.5 EOL Resistor Value 24
4.6 Zone Programming 24
4.7 Swinger Programming 27
4.7.1 Swinger Shutdown Count For Siren 27
4.7.2 Swinger Shutdown Count For Dialer 28
4.8 Zone Status Programming 28
4.8.1 STAY Mode 2 Automatically Bypass Zones 28
4.8.2 Reserved 28
4.8.3 Zone Status Reporting Options 28
4.9 RF Programming 29
3.11 Fault Analysis Mode 16
To Next Page
Loading...
