Bosch ICP-SOL2-P - Arm; Disarm Reporting Options; Reserved; Codepad Reporting Options; System Status Programming

Arm / Disarm Reporting Options
Item Location Option Default New
Arm / Disarm
Reporting Options
0403 0 = No Arm / Disarm Reports allowed
1 = Report to Receiver 1
2 = Report to Receiver 2
4 = Report to both Receiver 1 and Receiver 2
8 = Report to Receiver 2 only if Receiver 1
fails
1
Reserved
Item Location Option Default New
Reserved 0404 - 0410
Codepad Reporting Options
Item Location Option Default New
Codepad Reporting
Options
0411 0 = No Codepad Alarm Reports allowed
1 = Report to Receiver 1
2 = Report to Receiver 2
4 = Report to both Receiver 1 and Receiver 2
8 = Report to Receiver 2 only if Receiver 1
fails
1
System Status Programming
Reserved
Item Location Option Default New
Reserved 0412 - 0423
Access Denied(Code Retry)
Item Location Option Default New
Code retry limit 0424 0 = Unlimited
1 – 15 = Error code attempts
6
Reserved 0425 - 0426
System Status Reporting Options
Item Location Option Default New
System Status
Reporting Options
0427 0 = No report required
1 = Report to Receiver 1
2 = Report to Receiver 2
4 = Report to both Receiver 1 and Receiver 2
8 = Report to Receiver 2 only if Receiver 1
fails
1
4.10.2
4.10.3
4.10.4
4.11
4.11.1
4.11.2
4.11.3
 en | Programming Parameters Control Panel
2014.06 | 02 | F01U298027 Quick Reference Guide Bosch Security Systems, Inc.