Bosch ICP-SOL2-P - 5.6 Fault Analysis Mode; 5.6.1 Fault Descriptions

Dialing Format
Item Location Option Default New
Dialing Format 0080 1 = Australian DTMF
2 = Reserved
3 = Reserved
4 = International DTMF
5 = Reserved
6 = Reserved
1
External Network Module 1
Item Location Option Default New
External Network Module
1
0081 0 = Not used
1 = Use, do not configure
2 = Use and configure
0
External Network Module 2
Item Location Option Default New
External Network Module
2
0082 0 = Not used
1 = Use, do not configure
2 = Use and configure
0
Password for A-Link Plus/RSC Connection
Item Location Option Default New
Password for A-Link
Plus/RSC Connection
0083 - 0092 0
Telco Arming Sequence (Call Forward On)
Item Location Option Default New
Telco Arming Sequence 0113 - 0142 0 = 0 and 10
15 = Telephone termination
0
Telco Disarm Sequence (Call Forward Off)
Item Location Option Default New
Telco Disarm Sequence 0143 - 0158 0 = 0 and 10
15 = Telephone termination
0
Call Back Telephone Number
Item Location Option Default New
Call Back Telephone
Number
0159 - 0174 0 = 0 and 10
15 = Telephone termination
0
4.1.3
4.1.4
4.1.5
4.1.6
4.1.7
4.1.8
4.1.9
 en | Programming Parameters Control Panel
2014.06 | 02 | F01U298027 Quick Reference Guide Bosch Security Systems, Inc.