Bosch ICP-SOL2-P - Consumer Options 1; Reserved; Partitioning Options 1

Consumer Options 1
Item Location Option Default New
Consumer Options 1 0496 1 = Test reports only when armed
2 = Test report after siren reset
4 = Auto arm in STAY Mode 1
8 = STAY indicator to display day alarm status
0
Consumer Options 2
Item Location Option Default New
Consumer Options 2 0497 1 = Codepad displays extinguish after 60 sec.
2 = Single button arming allowed (AWAY/STAY
Modes 1 and 2)
4 = Single button disarming allowed (STAY
Modes 1 and 2)
8 = Alarm memory reset on disarm
2
Consumer Options 3
Item Location Option Default New
Consumer Options 3 0498 1 = Codepad fault beeps allowed
2 = Use digit 3 for codepad duress alarm
(instead of digit 9)
4 = Alarms activate sirens and strobe outputs
in STAY Modes 1 and 2
8 = Zone tamper alarms to be silent
5
Reserved
Item Location Option Default New
Reserved 0499
Partitioning Options 1
Item Location Option Default New
Partitioning Options 1 0500 1 = First to Disarm/Last to Arm reporting
2 = Reserved
4 = Reset sirens from any area allowed
8 = Reserved
0
0
4.15.5
4.15.6
4.15.7
4.15.8
4.15.9
3 en | Programming Parameters Control Panel
2014.06 | 02 | F01U298027 Quick Reference Guide Bosch Security Systems, Inc.