Bosch ICP-SOL2-P - Test Report Programming; Test Report Time (Automatic); Test Reporting Dialer Options; Output Programming

Test Report Programming
Test Report Time (Automatic)
Item Location Option Default New
Hour of day (tens digit) 0428 0
Hour of day (units digit) 0429 0
Minute of day (tens digit) 0430 0
Minute of day (units digit) 0431 0
Reserved 0432 - 0433
Repeat interval in days 0434 0 = Disable
1 – 15 = 1 – 15 days
0
Test Reporting Dialer Options
Item Location Option Default New
Test Reporting Dialer
Options
0435 0 = No report required
1 = Report to Receiver 1
2 = Report to Receiver 2
4 = Report to both Receiver 1 and Receiver 2
8 = Report to Receiver 2 only if Receiver 1
fails
1
Output Programming
Item Location Default New Item Location Default New
Output 1 (Default = Horn Speaker) Relay Output (Default = Sirens Running)
Event Code 0436 1 Event Code 0454 1
Event Code 0437 14 Event Code 0455 15
Polarity 0438 0 Polarity 0456 1
Time Base 0439 0 Time Base 0457 0
Time Base Multiplier 0440 0 Time Base Multiplier 0458 0
Time Base Multiplier 0441 0 Time Base Multiplier 0459 0
Output 2
(Default = Fire Alarm With Verification)
Codepad Buzzer
(Default = Entry/Exit Warning and Day Alarm)
Event Code 0442 2 Event Code 0460 0
Event Code 0443 7 Event Code 0461 13
Polarity 0444 10 Polarity 0462 2
Time Base 0445 2 Time Base 0463 1
Time Base Multiplier 0446 1 Time Base Multiplier 0464 0
4.12
4.12.1
4.12.2
4.13
Control Panel Programming Parameters | en 
Bosch Security Systems, Inc. Quick Reference Guide 2014.06 | 02 | F01U298027