Notice!
Recommend to use A-Link Plus Software or text codepad IUI-SOL-TEXT to enter IP
Destination items. Or enter IP Destination items via ASCII Character Codes with ICON
codepad IUI-SOL-ICON .
Program IP Destination with A-Link Plus Software or text codepad
1. In receiver configuration, select Transmission Format as CSVIP , and enter Subscriber ID
Number.
2. In network configuration, select Network Module as Use, do not configure.
3. Enter IP Destination (IP 1 + Port, or IP2 + Port), for example, 192.168.226.17:12000.
4. Enter CSVIP User Name and Password:
– Both user name and password, enter as user name with comma and password with
comma, for example, USER 1, 2580,.
– Only user name, enter as user name with two commas, for example, USER 1,,.
– Only password, enter as comma, followed by password with comma, for example, ,
2580,.
– No user name and password, only enter two commas.
5. Download programming data from A-Link Plus to the control panel.
For A-Link Plus, enter 32 case sensitive alphanumeric characters for CSVIP User Name and
Password directly through keyboard.
For text code, enter sensitive alphanumeric characters as below table.
Codepad Key Characters / Function Codepad key Characters / Function
Ⴃ Step back former character 6 [ m ], [ n ], [ o ], [ 6 ]
_ Exit item setting 7 [ p ], [ q ], [ r ], [ s ], [ 7 ]
Ⴍ Move to next character 8 [ t ], [ u ], [ v ], [ 8 ]
1 [ . ], [ @ ], [ : ], [ _ ], [ 1 ] 9 [ w ], [ x ], [ y ], [ z ], [ 9 ]
2 [ a ], [ b ], [ c ], [ 2 ] * Case shift
3 [ d ], [ e ], [ f ], [ 3 ] 0 [ clear ], [ , ], [ / ], [ ? ], [ 0 ]
4 [ g ], [ h ], [ i ], [ 4 ] # Confirm item setting
5 [ j ], [ k ], [ l ], [ 5 ]
Table 4.4: Alphanumeric characters on text codepad
Program Email with A-Link Plus Software
1. In receiver configuration, select Transmission Format as Email, and enter Account
(Subscriber ID Number).
2. In network configuration, select Network Module as Use and configure.
3. Enter email receiver’s email address.
4. Download programming data from A-Link Plus to the control panel.
Control Panel Programming Parameters | en
Bosch Security Systems, Inc. Quick Reference Guide 2014.06 | 02 | F01U298027
To Next Page
Loading...
