FlexiDome
DN
IP Introduction | en 17
Bosch Security Systems Operating Instructions V 1.0 | 2006.12
1.3 System requirements
– Computer with Windows 2000/XP operating system, net-
work access and Microsoft Internet Explorer web browser
version 6.0 or later
or
– Computer with Windows 2000/XP operating system, net-
work access and reception software, for example VIDOS,
BMVS or DIBOS 8.0
or
– MPEG-4 compatible hardware decoder from
Bosch Security Systems (such as VIP XD) as a receiver and
a connected video monitor
The minimum PC requirements are:
– Operating platform: a PC running Windows 2000 or Win-
dows XP with IE 6.0
– Processor: 1.8 GHz Pentium IV
– RAM memory: 256 MB
– Video system: 128 MB video memory, 1024 x 768 display
with 24-bit color
– Network interface: 100-BaseT
–DirectX: 9.0b
1.4 Overview of functions
The integrated camera unit incorporates a network video
server. Its primary function is to encode video and control data
for transmission over an IP network. With its MPEG-4 encoding
it is bandwidth efficient for both network and recording. The
use of existing networks means that integration with CCTV sys-
tems or local networks can be achieved quickly and easily.
i
NOTICE! Make sure the graphics card is set to 16-bit or 32-bit
color depth and that Sun JVM is installed on your PC. To play
back live video images, an appropriate MPEG ActiveX must be
installed on the computer. If necessary, install the required
software and controls from the product CD provided. If you
need further assistance, contact your PC system administrator.
To Next Page
Loading...
