66 en | Configuration via the browser FlexiDome
DN
IP
V 1.0 | 2006.12 Operating Instructions Bosch Security Systems
2. Click Finish to complete the configuration. All settings are
now transferred to the unit and subsequently become
effective.
7.8.2 Partition status
1. Click Partition status.
– A window opens showing information on the high-
lighted partition. This window provides information
about the current configuration of the partition. No
changes can be made here.
2. Click OK to close the window.
7.8.3 Editing a partition
!
CAUTION! Changes to a partition lead to a re-organization
which results in the loss of all sequences stored on that
partition. Consequently, you should back up all important
sequences on the computer's hard drive before modifying the
partition.
To Next Page
Loading...
