FlexiDome
DN
IP Configuration via the browser | en 61
Bosch Security Systems Operating Instructions V 1.0 | 2006.12
7.7 iSCSI settings
If you select type iSCSI server as the storage medium, you then
need to set up a connection to the desired iSCSI storage device
and set the configuration parameters.
7.7.1 iSCSI IP address
1. Enter the IP address of the required iSCSI server here.
2. Click Connect. The connection to the IP address is estab-
lished. The iSCSI LUN map field contains the correspond-
ing logical drives.
i
NOTICE! The storage device selected must adhere to the iSCSI
specification, be available on the network and be completely
set up. Amongst other things, it must have an IP address and be
divided into logical drives (LUN).
To Next Page
Loading...
