22 en | Mounting the unit FlexiDome
DN
IP
V 1.0 | 2006.12 Operating Instructions Bosch Security Systems
3 Mounting the unit
The unit may be surface mounted in two different ways depend-
ing on whether the connection is via the top or the side. Refer
to the dimensions drawing to find the exact position of the
screw holes and the entry hole for the wires.
Fig. 3.1 Surface mounting - side connection
Fig. 3.2 Surface mounting - top connection
Wires
Mounting plate
Conduit
Integrated camera unit
and base
Three screws
(M5, supplied)
Three screws (supplied
with camera)
Solid surface (three
pre-drilled 8mm holes)
Suspension wire
Cap
Mounting plate
Conduit
Three screws (supplied
with camera)
Integrated camera unit
and base
Solid surface (three
pre-drilled 8mm holes)
Three screws
(M5, supplied)
Wires
Suspension wire
To Next Page
Loading...
