FlexiDome
DN
IP Configuration via the browser | en 39
Bosch Security Systems Operating Instructions V 1.0 | 2006.12
7 Configuration via the browser
7.1 Settings
When a connection is established, the Livepage is initially dis-
played. Click Settings in the application title bar to configure
the camera and the application interface. A new page contain-
ing the configuration menu is opened.
All settings are stored in the camera memory, and they are pre-
served even if the power is interrupted.
Configuration menu tree
The configuration menu tree allows all parameters of the cam-
era to be configured. The configuration menu is recommended
for expert users or system administrators. All unit parameters
can be accessed in this mode. Changes that influence the fun-
damental functioning of the unit (for example firmware
updates) can only be made using the configuration menu.
To Next Page
Loading...
