56 en | Configuration via the browser FlexiDome
DN
IP
V 1.0 | 2006.12 Operating Instructions Bosch Security Systems
– Enhanced: the camera optimizes contrast in applications
with high IR illumination levels.
– Normal: the camera optimizes contrast in mono applica-
tions with visible light illumination.
7.5.4 Enhance
Auto Black
Autoblack ON automatically increases the visibility of details.
Black Level
Adjusts the black level between 0 and approximately 110mV.
Zero position of slider corresponds to the factory default black
level.
Contour
Adjusts the sharpness of the picture. 0 corresponds to the
default position.
Dynamic Noise Reduction
In AUTO mode the camera automatically reduces the noise in
the picture. This may cause some motion blur on moving
objects.
Enhanced Dynamic Range
In XF-DYN mode the camera automatically optimizes the con-
trast in the picture.
To Next Page
Loading...
