FlexiDome
DN
IP Configuration via the browser | en 53
Bosch Security Systems Operating Instructions V 1.0 | 2006.12
7.5 Camera settings
7.5.1 ALC
Video level
Adjust the video output level (-15 to 0 to +15).
Peak Average
Adjust the balance between peak and average video control
(-15 to 0 to +15).
At -15 the camera controls the average video level, at +15 the
camera controls the peak video level.
ALC Speed
Adjust the speed of the video level control loop (Slow, Medium
or Fast).
i
NOTICE!
If the camera is in monochrome mode, all color related menu
items are disabled and cannot be accessed.
To Next Page
Loading...
