FlexiDome
DN
IP Configuration via the browser | en 67
Bosch Security Systems Operating Instructions V 1.0 | 2006.12
1. Click Edit partition.
– A new window with the entries for the selected parti-
tion is opened. You can modify the configuration in
the Partition properties window.
2. Enter the necessary changes.
3. Click Set to save the modifications.
4. After closing the window, click Set in the main window to
transfer the changes to the unit and to save them.
Type of recording
Select the required recording type.
–In Ring mode the recording proceeds continuously. When
the maximum hard drive space is reached, the oldest
recordings are automatically overwritten.
–In Linear mode the recording proceeds until the entire
hard drive space is full. The recording is then stopped until
old recordings have been deleted.
Number of alarm tracks
i
NOTICE!
Alarm tracks must be set up for alarm recording.
To Next Page
Loading...
