FlexiDome
DN
IP Configuration via the browser | en 71
Bosch Security Systems Operating Instructions V 1.0 | 2006.12
Alarm track recording
This parameter is only active, if the alarm tracks have been con-
figured.
– Click the checkbox to activate alarm track recording. The
pre-alarm time gap is displayed automatically.
Post-alarm time
Select the post-alarm time gap from the list box.
Post-alarm profile
Select the encoder profile to use for recording during the post-
alarm time. The Standard profile option sets this to the same
as the standard profile.
Motion detection/video alarm
Select the alarm type that is to trigger a recording.
To Next Page
Loading...
