20 en | Connections PLENA matrix
2020-12 | V1.1 |
User manual
Bosch Security Systems B.V.
Number Item Description
11 Network – RJ45 Ethernet communication socket:
– Communication with the PLENA matrix GUI application.
Warning!
The 12V DC power output (Auto Standby) connection should be only connected with
products in accordance with recommendations outlined in this manual.
Notice!
Recommended motion sensors for use with the auto standby mode are the Bosch range of
sensors.
For more information regarding Bosch security products contact your local Bosch Security
certified partner or go to www.boschsecurity.com for details.
Notice!
It is recommended that the cable used Amp Link cable is a high quality STP CAT‑5 (e) cable.
Amp Link cable distances should not exceed 5 meters per cable.
To Next Page
Loading...
